- NEWSDAY.CO.TT - A la Une - 01/Sep 06:43

Is the M4MacMini a workstation?

BitDepth#1526 MARK LYNDERSAY IN JANUARY, I made a tough decision. For just over ten years I'd been carefully tending a legacy system created to support one app, Adobe's Photoshop CS6. Adobe’s subscription model was offensive to me and supporting the last "perpetual licence" version of that software was becoming untenable. The story of that experience and all the systems I went through before settling on an M4MacMini is here: (link.technewstt.com/bd1498). This is tale of everything that's happened since then. A MacMini replacing a cheese-grater MacPro, an aluminium behemoth that stood 20 inches tall by 17 inches wide, weighing 40 pounds fully loaded or even a trashcan MacPro (9 x 6 inches, 11 lbs) with the M4MacMini, a comparative doorstop at five inches square, two inches deep and weighing 1.5 lbs, seems absurd. It actually looks kind of wack, but I can tell you straight up that on performance, the M4MacMini is leagues faster than all its predecessors. But unlike them, you can't upgrade this computer after purchase. You have to choose your specs on purchase and live with them for the machine's life. There are two models, the M4MacMini and the M4MacMini Pro. For a workstation, the pro version is highly recommended. The pro bumps the CPU cores from 10 to 12 and the GPU cores from 10 to 16. With a bit more flex in the budget, I'd have gone for the ultimate upgrade – 14 CPU cores and 20 GPU cores – but needs must. These incremental upgrades are where Apple makes its real money and the cost of RAM and SSD upgrades are particularly rapacious. The sweet spot for RAM for me has traditionally been 64GB, but I dialled that down to 48GB for this system and skipped the devastatingly expensive SSD upgrades entirely, sticking with the stock 512GB. Upgrading to 4TB internally costs an astonishing US$1,200, so no, heck no. I offload working files to connected external drives anyway and planned to make full use of the three Thunderbolt 5 ports on the M4MacMini pro edition. Beyond the processor upgrades, my other error, the one that stings now, is not choosing the 10 gigabit ethernet port. The pain point in my current installation turns out to be the speed of file transfer between systems on my network. So the plan is to eventually add a 2.5 gigabit ethernet switch and adapters for connected systems. Apple's US$100 surcharge for the faster built-in connection is actually one of the few bargains in the company's upgrade packages. Also connected are a primary 34-inch BenQ IPS widescreen monitor and a Dell 34-inch OLED widescreen as a secondary (that one's shared with the writing laptop when I need the screen real estate there). The OLED only has one DisplayPort connector and Apple's built-in HDMI implementation remains terrible. To get faster refresh rates out of the monitor (144 Mhz) and better non-HDR fidelity on the M4MacMini, a dedicated HDMI to Thunderbolt adapter was needed. There's a barely managed rat's nest of cabling behind the M4MacMini that leads to two four-bay hard-drive cases and a 4TB SSD external. Even on Thunderbolt 4 protocols, that drive is a bit slower than the internal SSD, which transfers at around 5,000 Mb/s compared to the external at 3,400 Mb/s. There are some use cases where that's a big difference. Mine is not one of them. By comparison, spinning hard drives slog along at around 175 Mb/s, which is actually pretty brisk compared to older connection protocols, but you feel it today when the drives spin up. I could more than double those speeds in the same drive bays over the same connection by choosing RAID over independent access, but that's not an option I'm comfortable with. In a more liquid financial future, a fast NAS might be useful. Drive bays that connect via USB 3.2 to the M4MacMini when I need them, prove that the bottleneck is spinning drive access speed, not the ports or cabling. Almost all this was done incrementally over the last six months, and the landscape of connectors and adapters is much better now. There are more external drive solutions and port expanders/docks that support the 80-120 Gb/s transfer speed of the pro M4MacMini’s three Thunderbolt 5 ports. With the right drive case and NVME SSD, it's possible to get transfer speeds above 7,000 Mb/s, read/writes that are faster than the internal SSD. Thunderbolt 5 docks simplify connecting many peripherals effectively to a single port, but remain costly, though greater supply will inevitably push prices down. Mark Lyndersay is the editor of technewstt.com. An expanded version of this column can be found there The post Is the M4MacMini a workstation? appeared first on Trinidad and Tobago Newsday.