Hello, im going for maxxecu to my r32 gtst. And maxxecu sells maxxecu->oem harness adaptor for rb25/rb26. can this adaptor be used for...
Vous n'êtes pas connecté
Hi All, Ive recently pulled my head in and gotten started on my 2year long project for my R32 RB25 swap, I went into it head high and confident it was an easy swap and plug and play wiring. I was wrong. The engine is a S1 RB25 and I'm running RB25 ECU And loom. I got the swap done a few weeks ago and have been working on the car on my time off, however i cannot get the engine to run, at first the engine would crank however the fuel pump would not run, i dove a little deeper and realised that i would need to connect the wires from the RB25 Body Loom and the RB20 Body loom. went through the ECU pinout and followed the wires from the Body looms one by one to find what was needed to start the car. Now I have rewired the RB25 loom with the old R32 Body loom attached, however i am still having issues starting the car, now the pump works but still wont fire. The car has spark but looks very weak, however I'm suspect that its not getting any fuel. I have read a few posts related to the "Main plug" near the air intake however cannot find any information on what wiring to hook up to where. If anyone has done this swap, or has any knowledge at all on RB25's into 32 i would really appreciate your comment regarding this, im really keen to get this car finished. Thanks in advance
Hello, im going for maxxecu to my r32 gtst. And maxxecu sells maxxecu->oem harness adaptor for rb25/rb26. can this adaptor be used for...
So i got a 97 stagea with rb25 and it’s having issues running it starts runs for a good 10 or so seconds than shuts down used to run horrible for a...
I joined this group years ago when I got my hands on an R33 GTS-T and was excited to get some mods on it. Unfortunately, I had to do the adult thing...
Parting out my project car. For sale is -RB26 long block from an r32gtr and a rd28 sump. Valve covers to sump. Intake but no exhaust (might...
Parting out my project car. For sale is -RB26 long block from an r32gtr and a rd28 sump. Valve covers to sump. Intake but no exhaust (might...
For sale is my 2002 VX SS LS1 Commodore $30,000 ono 160k km Located at Holsworthy 2173, NSW Extremely clean car and well...
If anyone asks me, years down the road, after the collapse that’s coming has already occurred, when is the moment you realized the West’s elites...
I have two questions here, The first is regarding the harness attached to the power window and central locking control on the drivers door. I...
OPPOSITION Senator Dr Tim Gopeesingh promised that a future UNC government would set up a helpline for frustrated hospital patients, as he claimed...
Anyone have any tips on replacing the high pressure PS line on a R32 GTR? Mine started leaking and got a new one but can not for the life of me figure...