X

Vous n'êtes pas connecté

Rubriques :

Maroc Maroc - SAU.COM.AU - content - 23/12/2025 18:24

Turbo help! R32

Hi everyone, need a little help with my turbo setup on my r32 skyline rb20det. Been thinking about going to a smaller turbo than the one I have now. I came across the Pulsar 4849g (g25-550) and an artec manifold specifically the v band reverse rotation cast manifold. Which required a “Garrett” turbo because the provided locating rings for the turbine housing. My question is are the turbine housing inlets the same? Both the same v band 3”? On the pulsars website it says for PSR 4849g that the turbine housing inlet size is 2.5” but when I emailed and asked them they sent me a screenshot (the picture you see) which shows that 2.990 caliper reading and they stated it was an identical clone to the g25-550 Garrett. I just want to make sure before I spend the money that the v band PSR 4849g will be a direct fit for the artec RB20det manifold using the Garrett locating rings. Any help would be greatly appreciated as I’m still learning about the turbo stuff. I just want to make sure just incase since i'm sure someone has dealt with this thought process before. Thanks for taking the time!

Articles similaires

Sorry! Image not available at this time

R32 skyline!

sau.com.au - 23/12/2025 18:16

Hey all, Been lurking and reading on here for a while and seeing all the sweet builds. Finally decided to post on here and just bought a R32 skyline...

Sorry! Image not available at this time

Rb20 missing bolt name

sau.com.au - 24/12/2025 21:03

Happy holidays to those who celebrate, I’m having some troubles locating the specific bolt size, for my rb owners out there does anyone know what...

Sorry! Image not available at this time

Running Rich at Negative Manifold Pressure

sau.com.au - 30/12/2025 16:26

Hi all, I'm running a Haltech Elite 2500 on an RB26 running at 1.4 bar. It has stock turbos, aftermarket injectors, and stock BOVs. My challenge is...

Sorry! Image not available at this time

R32 GTR w/ R33 GTR turbos, O2 sensor question.

sau.com.au - 22/12/2025 20:55

TLDR; what do I need to do to get R33 O2 sensors to read fine on a R32 ecu... or should I rip the turbos back out and swap the downpipes back over...

Sorry! Image not available at this time

R32 GTR w/ R33 GTR turbos, O2 sensor question.

sau.com.au - 22/12/2025 20:55

TLDR; what do I need to do to get R33 O2 sensors to read fine on a R32 ecu... or should I rip the turbos back out and swap the downpipes back over...

Sorry! Image not available at this time

S13/R32 RWD Rear Subframe - Anti-squat and roll center questions

sau.com.au - 20/12/2025 15:38

I'm in the middle of pulling my rear subframe off with the intention of installing GKTech subframe bushings and their anti-squat reduction. I was just...

Sorry! Image not available at this time

Misfire on cylinder 4 only, Possibly ECU/Tune related?

sau.com.au - 22/12/2025 14:55

Hi! I'm throwing my problem out into the SAU community knowing i'll get great feedback and learn something in return. I have a 1990 Nissan R32 with a...

Sorry! Image not available at this time

I haven't spoken to my mother in 6 years. I'm making sure to show up ...

wn.com - 30/12/2025 20:00

TK Maskot/Getty ImagesI've been estranged from my mom for several years. Looking back, I can see how my childhood is shaping the way I'm raising my...

Sorry! Image not available at this time

I haven't spoken to my mother in 6 years. I'm making sure to show up ...

wn.com - 30/12/2025 20:00

TK Maskot/Getty ImagesI've been estranged from my mom for several years. Looking back, I can see how my childhood is shaping the way I'm raising my...

Sorry! Image not available at this time

John Lennon’s son worries Gen Z is forgetting The Beatles, and the music that made ...

wn.com - 22/12/2025 12:29

John Lennon’s son, Sean Ono Lennon, is worried about the Beatles’ legacy. During a new interview on “CBS Sunday Morning,”...

Les derniers communiqués