Hi all Started routine maintenance today and had to take the cover off to get to the spark plugs. When removing the small pipe that goes...
Vous n'êtes pas connecté
Hi, I have a 2000 Skyline ENR34 (4wd) with an automatic transmission that I would like to convert to RB25DET. I have access to a 4wd, RB25DET 1996 Stagea with auto tranmission that is being parted out. Please, help me get the part list needed for the swap. I was planning on just getting the RB25DET engine with the turbo, manufolds, intercooler, piping, downpipe and ECU but was told that the auto transmission in ENR34 that doesn't have the "manual" +/- gear selections is the weakest of all and needs to be replaced too. Thus I might be buying transmission too. So, I would like to ask those who know this stuff to comment please before I cash out for parts I might not need. Is that auto transmission in ENR34 really that week that it's better to replace it? Would a 1996 4wd turbo Nissan Stagea have a NEO6 engine or it is pre-neo6 engine? If it's a pre-neo6, is there much difference to neo6 to question this swap if I should do it or not? What is better - to add turbo/manifolds/piping/intercooler/ecu to RB25DE leaving the originalengine with the head and auto transmission in the car as is or swap to RB25DET and possible transmission swap too? If I swap the transmission to that from 1996 Stagea, would I still be able to use/keep the trim/shifter from Skylne and would it have the same gear/ratio to work with the rear diff from ENR34 or if I'm putting a Stagea transmission then I would need to match it with the rear diff from Stagea too? I know that's lots of questions but I would rather get prepaired before the work starts than start and make mistakes as I go to be figuring them out after it's too late. Let me know as I don't want to miss this part-out DET 4wd Stagea as they don't come too often in Canada. Thanks in advance!
Hi all Started routine maintenance today and had to take the cover off to get to the spark plugs. When removing the small pipe that goes...
Hello from Germany, i build my RB25DET Series 2 -> Target 600hp i have now ordered solid lifters from Tomei for the cylinder head...
like the title says, I am asking for clarification as what stock throttle body should be used when putting front facing intake on r34 gtt rb25det neo...
Hi! My R32 GT-R has developed a 4wd light I've done some error finding and need to have some input If i start the car i get the 4wd lamp in...
Now here is an album I didn’t expect to actually see come to life. There have been rumours of this for years, ever since the time of Punk Goes...
Hi guys, I'm chasing a recommendation for a turbo charger to suit 600whp. Engine is a RB25 series 2, with rebuilt forged internals with...
Last May, BMW Motorrad Malaysia introduced the BMW CE 02 for the local market. This electric motor looks different from most electric motors in the...
Last May, BMW Motorrad Malaysia introduced the BMW CE 02 for the local market. This electric motor looks different from most electric motors in the...
It's now 49 days until the November election and the Republican-led Congress is facing another major deadline. If there's no continuing resolution or...
THE EDITOR: So we the people in sweet TT have gotten the news that very soon our electricity bill might be increasing. Well, there was talk about...