Hi there, Does anyone here have the carbonetics slam panel installed on their R34 GTT? Or used to have one and got some pics of how it sat? ...
Vous n'êtes pas connecté
Hey guys. So bit of back story to understand where I’m at. So had to install a new dash harness as I shorted something and fried some of the old loom, easiest way to sort it was get a new loom and install it. Now my car was auto, manual converted by a previous owner, and they installed a manual cluster, left the auto loom. New loom is from a R34 GTT manual car, and pretty much everything plugs up, except for the plug for the triple gauge cluster off the loom. The photo shows the two plugs in question. On the left is the plug for the triple gauge harness, on the right is an 8 pin plug that comes off the new loom. There is no other possible plug that could be for the triple gauge. The ONLY thing we can work out is the previous car had one of those pop up TV’s, and this connector is for that. Does anyone have a photo or can take a photo of the plug for the harness for the tv unit? Theres also some other random plugs on the loom down near the radio on the new loom that could have been for the TV controls that are under the climate control unit maybe? Any help would be greatly greatly appreciated!
Hi there, Does anyone here have the carbonetics slam panel installed on their R34 GTT? Or used to have one and got some pics of how it sat? ...
like the title says, I am asking for clarification as what stock throttle body should be used when putting front facing intake on r34 gtt rb25det neo...
Hi all Started routine maintenance today and had to take the cover off to get to the spark plugs. When removing the small pipe that goes...
MSI Claw is a PC gaming console introduced by MSI earlier this year, and has entered the local market a few months later. Powered by an Intel Meteor...
Hi can anyone shed some light, pin 104 and 106 from rb26 ecu is not connected is this important? If so will i need the fpcm and wire this in? ...
Hi can anyone shed some light, pin 104 and 106 from rb26 ecu is not connected is this important? If so will i need the fpcm and wire this in? ...
GTT takes on strategic and forward-looking transformation by rebranding the company to “One Communications”. This move, according to Chief...
GTT takes on strategic and forward-looking transformation by rebranding the company to “One Communications”. This move, according to Chief...
The refuge centre is replacing a previous four-unit facility that is considered no longer fit for purpose.
GTT announces that it has received, in the third quarter of 2024, two orders from two Korean shipyards for the […]