Hi there, have an s15 3.69 long nose abs diff in my r34 and would like to go to a 4.11 and 5 bolt shafts Does anyone know if pinion and crown...
Vous n'êtes pas connecté
I would like to mention I've done research on this topic. However, I have struggled to find an answer and am here seeking advice. I have an R34 Skyline GT-X (series 1), meaning a stock non-turbo automatic. 2 2-wheel drive IRS (no HICAS), and no viscous lsd option. It has an open diff, from my understanding it is a R200 ABS Open Diff 4.08 ratio 3x2 bolt pattern. I have stock GT axles. The car now has been manual converted and running a forged 25det making around 600hp. The open diff is a nightmare. I want to upgrade the rear diff for sure. I am potentially interested in upgrading the axles as well as I know some of the other diffs can be put into my car if the axles are changed - also not really sure how they hold up with the power my car makes. What is recommended? I saw for sale a "R33 SKYLINE RB25DET 4.0 3x2 BOLT AXLE R200 LSD DIFF HEAD" for 750 NZD - is this a potentially good option? Would this be straight bolt on? Thanks
Hi there, have an s15 3.69 long nose abs diff in my r34 and would like to go to a 4.11 and 5 bolt shafts Does anyone know if pinion and crown...
With my CD swap I am going carbon driveshaft; I want my driveline as sturdy as possible; however one thing that keeps bugging me is the rear diff...
Hey guys looking for abit of guidance, I have put a 25det into my r31 and am having trouble getting it to idle it will rev fine and not miss but on...
Will a GTR diff fit into a GTST? will it bolt in directly. Can I swap my current GTST stubs and shafts onto the GTR Diff? sorry newbie when...
Will a GTR diff fit into a GTST? will it bolt in directly. Can I swap my current GTST stubs and shafts onto the GTR Diff? sorry newbie when...
Hi there, Does anyone here have the carbonetics slam panel installed on their R34 GTT? Or used to have one and got some pics of how it sat? ...
Hello from Germany, i build my RB25DET Series 2 -> Target 600hp i have now ordered solid lifters from Tomei for the cylinder head...
My r34 GTT auto transmission is slowly letting go, slipping every now and again, tiptronic deciding to not keep it in 1st / 2nd when flooring it,...
My r34 GTT auto transmission is slowly letting go, slipping every now and again, tiptronic deciding to not keep it in 1st / 2nd when flooring it,...
I bought the car like this, but the previous owner installed a on/off switch on the dash to turn on the AC compressor. I believe this switch is wired...